• DIN Rail Power Supplies
  • 5Vdc Output
  • 12Vdc Output
  • 15Vdc Output
  • 24Vdc Output
  • 30Vdc Output
  • 36Vdc Output
  • 48Vdc Output
  • 110Vdc Output
• Rack Mount Power Supplies
• Chassis Mount Power Supplies
• DC DC Converters
• Battery Chargers
• Variable Power Supplies
• AC UPS
• Frequency Converters
• DC UPS
• Single to 3 Phase Converter
• Legacy
• Adapter Power Supplies
• Batteries
• Accessories
• View Basket
• Your Account
• Shipping Rates

Selectable Output Voltage: Features an onboard selection switch to set the output voltage to 5V, 9V, or 12V depending on application requirements.

Ultra-Slim Profile: At just 17.6 mm wide, it occupies only 1 standard modular width unit on a DIN rail.

Low Standby Consumption: Features a standby power draw of less than 50mW (typical).

No Electrolytic Capacitors: Utilizes long-life, solid-state alternatives to eliminate wear-out phases common to traditional electrolytic capacitors.

Robust Protective Mechanisms:

• Input Overvoltage: Equipped with a Metal Oxide Varistor (MOV) to suppress moderate input transients.

• Output Short-Circuit: Built-in overtemperature shutdown; the unit can withstand an output short circuit indefinitely without damage.

• Output Overvoltage: Active overvoltage transient protection that utilizes a 10 $\Omega$ high-power resistor to quickly discharge the output under overvoltage conditions.

• Open-Circuit Resilience: Safely operates under open-circuit (no load) conditions for an unlimited duration.